BlueROV Battery Cable with Cobalt Connectors
SKU:
Attention: Custom length (0.1m-2.0m) is available! If you choose the custom size option, write the desired length in the instruction cart box.
Product Description
Upgrade your BlueROV with this Cobalt cable set to make your battery field-replaceable! Uses 4-pin Cobalt connectors with paired wires to give a 40-amp continuous current rating.
Contents
Technical Details
Downloads
Includes:
- Cobalt 4-pin bulkhead connector, 100 mm wire length, pre-installed 3.5-mm female bullet connectors
- Cobalt 4-pin cable with M10 Simple Penetrator, 190 mm cable length, wires extend 100 mm from Simple Penetrator, pre-installed 3.5-mm male bullet connectors
Install the bulkhead connector on the Electronics Enclosure and the cable on the Battery Enclosure.
Specifications
Environmental |
|
Depth Rating |
600 meters |
Operating Temperature |
0° C to +50° C |
Electrical |
|
Maximum voltage |
300 V |
Rated current |
40 amps |
Wire size |
16 AWG (paired) |
Wire stranding |
4-conductor version: 19/29 |
Materials |
|
Penetrator |
316 stainless steel |
Cable connector shell |
316 stainless steel |
Cable connector insert |
PEEK |
Cable sockets |
gold-plated contact |
Cable jacket |
95A UV-stabilized polyurethane |
wire insulation |
ETFE |
O ring |
nitrile |
Locking sleeve |
acetal |
Dimensions |
|
Penetrator thread |
M10 X 1.5 |
Penetrator hex |
16 mm |
Locking sleeve threads |
M16 X 1.5 |
Cable outer diameter |
8.0 mm |