This power supply provides 5v power at up to 6A. It accepts input voltages from 7v to 26v and uses a switching converter with minimal heat loss. It comes with two standard servo-style connectors, making it easy to use to power the Pixhawk 5v rail for servos, the Raspberry Pi, or other 5v devices.
5V 6A Power SupplyBEC-5V6A-R1
- 1 x 5V 6A Power Supply
|Supply Voltage||7-26V||2S-6S Li-po/Li-ion Battery|
|Output Voltage||5 Volts DC|
|Output Current (Max)||6 Amps (combined output)|
|Input Connector||Non-Insulated Spades|
|Output Connectors||3 position 0.1” (2.54mm) Crimp Connector Housing|
|Length||37 mm||1.45 in|
|Width||18 mm||0.71 in|
|Height||6 mm||0.24 in|
|Input Wire Length||140 mm||5.5 in|
|Output Wire Length||115 mm||4.5 in|
1. Connect the wires with the power spades to a positive and negative power source.
2. Connect the wires with the black Crimp Housing to your device. Make sure the polarity is correct.
3. Turn your power source on.